Cryorig C7 Cu CPU Cooler

SGD 89.00

The Power of Copper Copper is a malleable, and ductile metal with very high thermal and electrical conductivity. It’s nearly twice as thermal conductive as aluminum. However, 3 times as costly as aluminum normally making it the choice material for only the most thermal critical components such as heatpipes and heatsink bases. 15% IMPROVED PERFORMANCE The Advantages of Copper 15% Better Thermal Performance Taking advantage of copper’s superior thermal conductivity, the C7 Cu is capable of achieving a additional 15% of thermal performance compared to the standard C7. This is added performance without adding extra size or Fan RPM/CFM/dBA. Back Side Fiberglass enhanced plastic backplate is both sturdy and minimal in design, avoiding backside components. Front Side Kept in the CPU Keep Out Zone, means zero problems with front side RAM slots or components. Back Side (optional) In case of added backside components, the backplate can be replaced by the included washers to avoid interference. Made for Small Form Factor ITX - Max Size to Performance Ratio The C7 Cu is made to solve heatsink size limitations in SFF/ITX systems, unleash your CPU! With a total height of 47mm including heatsink and fan, the C7 Cu is in the same height range of stock heatsinks. Meaning the C7 Cu can fit and go into any system that is compatible with CPU stock coolers. Extra Air in Tight Spaces With Quad Air Intake In most SFF/ITX systems there’s limited space between the top of the heatsink and the case panel limiting fan front air intake. CRYORIG’s patent Quad Air Intake, adds four aero dynamic intakes in the corners of the fan pulling extra airflow from the sides of the fan. Nullify Vibrations With Built In Acoustic Absorbers Included with every C7 Cu fan are four pre-installed integrated Acoustic Absorbers. These thick silicon pads form a buffer between the fan and heatsink body, nullifying unwanted vibration noise. Socket Support: 1150, 1151, 1155, 1156 FM1, FM2/+, AM2/+, AM3/+, AM4 Heatsink Specification Dimension ( with fan ) L97 mm x W97 mm x H47 mm Weight ( with fan ) 675 g Weight ( without fan ) 613 g Heat pipes 6mm heatpipe x 4 units Fin T = 0.4 mm ; Gap = 1.2 mm Fin Pcs 57 pcs Copper Base C1100 Pure copper nickel plated RAM Height Limit Limitless TDP 115 W Fan Specification Dimension L92 mm x W92 mm x H15 mm Weight 62 g Rated Speed 600 ~ 2500 RPM ±10 % Noise Level 30 dBA Air Flow 40.5 CFM Air Pressure 2.8 mmH2O Ampere 0.2 A 2 Years Warranty

Fb messenger